Messages¶

Observing the traffic on the bus we can see there are different units. These are the address found on the 12 bus :

ADDRESS	UNIT
41	Hi-Mit remote controller
47	Hi-Mit remote controller
50	Hi-Mit remote controller
57	Hi-Mit remote controller
63	Hi-Mit remote controller
34
35
146
242
243

|57
|3
|10
|202
|160
|255
|255
|0
|0
|99

REQUESTS / REPLIES ANALYSIS¶

Here I try to report any communication pattern I can find :

41 - 146 interaction¶

Messages exchanged between Hi-mit interface and outdoor unit
WIP

47 - 242 interaction¶

|47|0|10|202|160|1|1|108|0|12|
ACK from 242
|242|0|48|1|1|1|1|108|62|0|31|129|129|27|0|0|0|0|0|0|0|22|0|0|0|0|0|0|0|20|60|50|7|24|25|129|129|0|100|3|0|0|8|0|4|0|0|7|
ACK from 47

50 - 35 interaction¶

|50|0|9|1|1|1|0|240|248|
ACK from 35
|35|0|36|1|0|1|1|255|0|40|32|0|0|0|2|0|3|34|128|31|0|31|128|18|170|0|0|0|41|41|1|3|241|208|0|106|
ACK from 50
|50|0|28|1|1|1|0|255|24|32|0|7|24|33|129|34|30|30|0|0|25|0|62|0|6|0|2|100|
ACK from 35
|35|0|14|1|0|1|1|254|16|32|16|32|0|241|
ACK from 50
|50|0|32|1|1|1|0|159|31|129|129|20|60|0|7|129|31|26|100|3|0|0|0|0|0|0|0|0|0|2|0|111|
ACK from 35

63 - 243 interaction¶

|63|1|9|202|160|1|0|0|99|
ACK from 243
|243|1|48|1|0|0|255|192|6|0|0|2|0|0|0|0|0|0|0|0|0|66|34|18|178|0|0|60|20|31|0|9|31|0|145|0|0|0|0|33|0|24|0|30|0|0|0|92|
|63|1|9|202|160|1|0|1|98|
ACK from 243
|243|1|48|1|0|0|255|193|6|0|0|0|0|26|0|0|0|0|7|0|0|0|129|0|0|0|31|0|0|100|31|0|0|0|0|3|129|0|0|0|0|0|129|0|0|0|0|243|

DEVICE DISCOVERY¶

When the Hi-mit interface is looking for devices on H-LINK bus the following messages are sent: (This messages were logged with no device connected on H-LINK bus)

SRC	CTRL	LEN						CRC
41	0	9	202	160	255	255	241	146

SRC	CTRL	LEN							CRC
57	3	10	202	160	255	255	0	0	99

AUTODISCOVERY ??¶

From time to time these messages appears on the bus, they are not always grouped together and they are not acknowledged, maybe they are used to report their presence ?

|35|0|10|1|0|1|255|15|20|238| <- UPDATE: VALUE 15 & 20 CHANGE OVER TIME, ARE THEY TEMPERATURE ?
|50|0|9|1|1|1|255|241|6|
|41|0|9|202|160|255|255|241|146|

|35|0|28|1|0|1|255|242|3|34|128|31|0|31|128|18|170|0|0|0|41|41|1|3|241|208|0|171| -> This is a status update but it seems no one requests or acknowledge

ALL MESSAGES¶

Here are reported all the messages captured :

ADDRESS 41 ( HI-MIT INTERFACE )¶

SRC	CTRL	LEN						CRC
41	0	9	202	160	255	255	241	146

SRC	CTRL	LEN						CRC
41	0	9	202	160	1	1	97	2

SRC	CTRL	LEN																																													CRC
41	0	48	202	160	1	1	107	62	31	8	255	11	12	45	24	0	0	26	28	28	28	28	28	28	28	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	211

SRC	CTRL	LEN																																													CRC
41	0	48	202	160	1	1	107	62	0	8	0	11	12	45	24	0	0	26	28	28	28	28	28	28	28	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	51

ADDRESS 146 ( PCB1 BOARD ? )¶

Messages coming from 146 seems to be associated with the master controller status.

The following message is sent when the MASTER CONTROLLER CYCLE 1 water temp is changed to 9°C :

SRC	CTRL	LEN							CYCLE1 WATER TEMP	SET TEMP	CRC
146	0	12	1	1	1	0	99	62	3	9	90

The following message is sent when the MASTER CONTROLLER CYCLE 2 water set temp is changed to 17°C :

SRC	CTRL	LEN							CYCLE2 WATER TEMP	SET TEMP	CRC
146	0	12	1	1	1	0	99	62	4	17	69

The following message is sent when the MASTER CONTROLLER DHW water set temp is changed to 46°C :

SRC	CTRL	LEN							POOL WATER TEMP	SET TEMP	CRC
146	0	12	1	1	1	0	99	62	5	46	123

The following message is sent when the MASTER CONTROLLER POOL water set temp is changed to 27°C :

SRC	CTRL	LEN							POOL WATER TEMP	SET TEMP	CRC
146	0	12	1	1	1	0	99	62	6	27	77

The following message is sent when the MASTER CONTROLLER POOL OR DHW is changed to DISABLED :

SRC	CTRL	LEN							POOL WATER TEMP	SET TEMP	CRC
146	0	12	1	1	1	0	99	62	7	0	87

ALSO THE FOLLOWING MESSAGE:
|146|0|43|1|1|1|0|96|62|0|0|73|119|185|131|9|0|0|16|2|64|1|0|24|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|50|

The following message is sent when the MASTER CONTROLLER POOL is changed to ENABLED :

SRC	CTRL	LEN							POOL WATER TEMP	SET TEMP	CRC
146	0	12	1	1	1	0	99	62	7	162	145

ALSO THE FOLLOWING MESSAGE:
|146|0|43|1|1|1|0|96|62|0|0|73|119|185|131|9|0|0|16|130|64|1|0|24|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|178|

The following message is sent when the MASTER CONTROLLER DHW is changed to ENABLED :

SRC	CTRL	LEN							POOL WATER TEMP	SET TEMP	CRC
146	0	12	1	1	1	0	99	62	7	22	65

ALSO THE FOLLOWING MESSAGE:
|146|0|43|1|1|1|0|96|62|0|0|73|119|185|131|9|0|0|16|34|64|1|0|24|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|18|

The following message is sent when the MASTER CONTROLLER CYCLE 1 - ROOM1 set temperature is changed to 22°C :

SRC	CTRL	LEN							ROOM1	SET TEMP	CRC
146	0	12	1	1	1	0	99	62	10	22	76

I messaggi con intestazione |146|0|12|1|1|1|0| 99 |62| sembrano essere generati quando vengono effettuate modifiche sul master controller interno. Il primo byte successivo sembra indicare l'id del parametro modificato ed il byte successivo contiene il valore modificato.

Inviato quando seleziono la modalità HEAT

SRC	CTRL	LEN								MODE ?																			CRC
146	0	30	1	1	1	0	99	62	1	64	3	20	4	20	11	22	12	22	13	22	14	22	15	22	16	22	17	22	24

SRC	CTRL	LEN									CRC
146	0	12	1	1	1	0	99	62	22	128	198

Inviato quando seleziono la modalità COLD

SRC	CTRL	LEN								MODE ?																			CRC
146	0	30	1	1	1	0	99	62	1	8	3	13	4	16	11	28	12	28	13	28	14	28	15	28	16	28	17	28	71

SRC	CTRL	LEN									CRC
146	0	12	1	1	1	0	99	62	22	160	230

Inviato quando seleziono la modalità AUTO

SRC	CTRL	LEN								MODE ?																	CRC
146	0	28	1	1	1	0	99	62	1	4	3	28	11	0	12	0	13	0	14	0	15	0	16	0	17	0	80

Il seguente messaggio di 48 Byte sembra essere un aggiornamento di stato periodico

SRC	CTRL	LEN								MODE		WATER SET TEMP CYCLE1	WATER SET TEMP CYCLE2	DHW SET TEMP	POOL SET TEMP				ROOM 1 SET TEMP																												CRC
146	0	48	1	1	1	0	97	62	0	8	0	11	12	45	24	0	0	0	26	28	28	28	28	28	28	28	0	0	0	0	160	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	242

MODE: 4(AUTO), 8(COOL), 64(HEAT)

ADDRESS 242 (UNKNOWN)¶

SRC	CTRL	LEN								WATER TEMP																												WATER PUMP SPEED		WATER FLOW ?							CRC
242	0	48	1	1	1	1	108	62	0	7	129	129	27	0	0	0	0	0	0	0	22	0	0	0	0	0	0	0	20	60	50	20	24	12	129	129	0	14	3	14	0	24	2	4	1	1	111

ADDRESS 50 (UNKNOWN)¶

SRC	CTRL	LEN						CRC
50	0	9	1	1	1	0	240	248

SRC	CTRL	LEN						CRC
50	0	9	1	1	1	255	241	6

SRC	CTRL	LEN	-	-	-	-	-	-	MODE	PUMP ?	WATER SET TEMP	?	IDU GAS TEMPERATURE	-	?	WATER OUT PHEX TEMP	WATER INLET TEMP										CRC
50	0	28	1	1	1	0	255	24	32	0	22	24	16	129	20	11	12	0	0	22	0	62	0	6	0	2	122

MODE is 32 when CYCLE 1 is OFF, when COOL MODE on CYCLE1 is enabled it changes to 9.
PUMP ? becomes 1 when cooling is enabled. Change to 17 when water pump is running. <- EDIT: NOT 100% SURE (PUMP SEEMS TO RUN EVEN WHEN PUMP=1 , MAYBE 1->CYCLE 1 ENABLED AND 17-> CYCLE1&ROOM1 ENABLED)
WATER SET TEMP IS SET WHEN CYCLE 1 IS ENABLED

SRC	CTRL	LEN																													CRC
50	0	32	1	1	1	0	159	30	129	129	20	60	0	7	129	30	26	100	3	0	0	0	0	0	0	0	0	0	2	0	111

ADDRESS 35 (UNKNOWN)¶

SRC	CTRL	LEN							CRC
35	0	10	1	0	1	255	15	20	238

SRC	CTRL	LEN											CRC
35	0	14	1	0	1	1	254	16	32	16	32	0	241

SRC	CTRL	LEN									EVAP GAS TEMP		DISCHARGER TEMPERATURE		IDU LIQUID TEMP		FREQUENCE		EVO%								CRC
35	0	28	1	0	1	255	242	3	22	128	25	0	51	128	17	110	0	0	0	41	41	1	3	241	208	0	114

SRC	CTRL	LEN															OUTDOOR TEMP		EVAP GAS TEMP		DISCHARGER TEMPERATURE		IDU LIQUID TEMP		FREQUENCE		EVO%								CRC
35	0	36	1	0	1	1	255	0	40	32	0	0	0	2	0	3	20	128	22	0	42	128	14	100	0	0	0	41	41	1	3	241	208	0	178

Message similar to the previous one with added 8 byte.

ADDRESS 47 (UNKNOWN)¶

Unit 47 seems to send only this request that 242 replies to

SRC	CTRL	LEN	-	-	?	?	?	?	CRC
47	0	10	202	160	1	1	108	0	12

ADDRESS 63 (UNKNOWN)¶

Unit 63 seems to only send request that 243 replies to. No other messages are captured at this time.

SRC	CTRL	LEN	-	-	?	?	?	CRC
63	1	9	202	160	1	0	0	99

SRC	CTRL	LEN	-	-	?	?	?	CRC
63	1	9	202	160	1	0	1	98

ADDRESS 243 (UNKNOWN)¶

Unit 243 seems to reply to 63 requests.

SRC	CTRL	LEN																FREQUENCE		FREQUENCE		OUTDOOR TEMP							DISCHARGER TEMP											FREQUENCE			EVAP GAS TEMP				CRC
243	1	48	1	0	0	255	192	6	0	0	2	0	0	0	0	0	0	0	0	0	64	30	17	159	0	0	60	20	30	0	1	30	0	145	0	0	0	0	34	0	24	0	29	0	0	0	68

SRC	CTRL	LEN													FREQUENCE																																CRC
243	1	48	1	0	0	255	193	6	0	0	0	0	26	0	0	0	0	7	0	0	0	129	0	0	0	29	0	0	100	29	0	0	0	0	3	129	0	0	0	0	0	129	0	0	0	0	243